IP camera Network settings

IP Network Setting:

• DHCP
• Static

DHCP: By default DHCP is enabled. You can assign static IP address from app or the web interface. If DHCP is enabled, IP camera will get DHCP router assigned IP.

Static: To assign static IP to the camera, assign an available IP address. Make sure not to assign an IP which has already been assigned to other device. If you assign same IP to two devices - both of them may stop working.

Using Browser(s):

Using dbell app:

Subnet Mask: Class C Network address default is 255.255.255.0

Gateway: Typically a Gateway IP is the router's IP address.

DNS: Same as Gateway address, or ISP DNS or OpenDNS etc.

MAC: MAC address is a unique identifier of the camera, manipulating MAC will void warranty.

DNS configuration Type:

• DHCP
• Static DNS 

DHCP: Server assigned DNS

Static: Same as Gateway address, or ISP provided DNS or OpenDNS etc.

If you are not familiar with Networking, we suggest keep DHCP or default settings. If your camera stops working after you made the changes,

• Try power cycle the camera. If that doesn't resolve the issues-
• Reset camera to retrieve the factory settings.

Default Network ports:

Protocol	Port	Description
HTTP	80	Web port
RTSP	554	RTSP port
RTMP	1935	RTMP port
FTP	21	FTP port
ONVIF	8080	ONVIF port