dbell PTZ camera setup for Android

To record footage locally, install Class-10 type microSD card with a capacity of 1~128GB

A 16GB capacity card provides approx. 90 days of recordings

.1 In a clean surface place the camera with no power to it.
Gently open the black ring by rotating counter clockwise.

.2 Loosen all 4 screws until you can remove the lens cover
Gently remove the lens cover and place aside

.3 Gently Tilt flat-side camera head outward as shown

.4 Insert Micro-SDHC Class-10 type card in the SD card Slot

To use camera with Wi-Fi >> Do app setup BEFORE mounting

To use camera with PoE or Data cable >> Do app setup AFTER mounting

.1 Do connect dbell camera to your Network

To use the camera with Wi-Fi, connect camera for a
short-term to a Network by data cable

.2 Do power up dbell camera

Camera should be in a steady place if it is not mounted.
Provide power using a PoE switch or PoE injector compliant with IEEE 802.3af/at

or

Provide power using a 12VDC, 1.0A adapter
DC power works only for a short distance, max. 1.5m

.3 Do app setup

Wait 2 min after powering-up
.1 Download dbell app
For iOS app: download here
For Android app:

1. Download Aptoide Lite 
2. Install Aptoide Lite app store
3. Search for dbell in Aptoide app store. dbell is not available at the play store
4. Download and install dbell app

.2 New user?
Register Now!

Register Now!

• Registration user name = dbell device user name
• Registration password = dbell app & device password

Returning user?
Sign In!

.3 App will find your camera
.4 Follow in-app wizard to complete the app setup

 .4 Scan Network

Adding additional camera:

.1 Tap Add Camera
.2 Follow in-app wizard
.3 Complete setup

• To use camera with Wi-Fi disconnect data cable
• Camera will go offline returning to online quickly

Tips!
If camera is offline after 2min., Check Wi-Fi password.

To use camera with Wi-Fi >> Do app setup BEFORE mounting

To use camera with PoE or Data cable >> Do app setup AFTER mounting

 .1 Use the supplied mounting Template to mark screw locations

 .2 Drill pilot holes for mounting screws. Install back box to the desired location

 .3 Install camera on the back box. Attach Wifi antenna.

 .4 Camera component identification above is - Wifi model, Below - non-Wifi model

Note:

• If the Wifi password is entered correctly, camera status will be online in less than 2 minutes of disconnecting Data cable. If camera doesn't become online within 2 minutes, see troubleshooting tips here
• Recommended wiring EIA/TIA 568B standard

Congratulations - you have successfully completed camera setup !