Connection Status gives you specific information needed to connect your dbell in other ways such as a browser or an NVR system.
How to get to this page in your app:
1. Choose the dbell you'd like and press the "Setup" which is indicated by a gear symbol on the right side in the main menu page.
2. Select "Advanced Settings."
3. Select "Network Connection Status."
DHCP: is a protocol that makes your router assign the dbell an IP address. Leave this section ON at all times unless you would like to give a static IP address to the dbell (this is for professionals only).
IP Address: shows you the IP address of your dbell, with which you can connect through a browser or NVR system.
Subnet: is a 32-bit number that masks an IP address, and divides the IP address into network address and host address.
Default Gateway: is the node in a computer network using the Internet Protocol Suite that serves as the forwarding host (router) to other networks when no other route specification matches the destination IP address of a packet.
LAN/Wi-Fi MAC: address is the hardware address of your dbell.