Find IP address to connect your dbell in with a browser or an NVR system
Here are the steps to get to this page in your app:
1. Choose the dbell you'd like and press the "Setup" which is indicated by a four square on the right side in the main page
2. Select "Advanced Settings".
3. Select "Network Connection Status"
DHCP: is a protocol that makes your router assign the dbell an IP address. Leave this section ON at all times unless you would like to give a static IP address to the dbell (this is for pro installer or expert users)
IP Address: shows you the IP address of your dbell, with which you can connect through a browser or NVR system
Subnet Mask: is a 32-bit number that masks an IP address, and divides the IP address into network address and host address
Gateway: is the node in a computer network using the Internet Protocol Suite that serves as the forwarding host (router) to other networks when no other route specification matches the destination IP address of a packet
LAN/Wi-Fi MAC: The hardware address of your dbell