Warning! Turn off power at fuse or breaker before work
Tools required: Power Drill or Screw Driver, Wire Strippers, Pliers
Information you will need: Your Wi-Fi SSID name and Password
- Remove existing doorbell
- Check existing doorbell power, it must be 12VAC~24VAC, 1.0A,
- If you do not have power from existing doorbell, you may use supplied dbell DC adapter inside your home to power dbell. dbell DC adapter power cable can’t be extended!
- Connect existing doorbell wires to the dbell Jumper cable(a),
- Tighten the locking screw to secure dbell